PCT is based on the principle of embedding an array of micro-fine sensing wires within a multi-layer laminated screen behind a protective front surface, ensuring that the sensing medium is well-protected from accidental and malicious damage. This technology is extremely robust and reliable, offers one of the industry's highest light transmission characteristics and can be operated with a gloved or ungloved hand

• Cutting Edge Embedded Technology.
• Excellance Awards Winner - KioskCom 2004 show in USA .
• Chosen by OEMs such as - NCR, EloTouch, Marconi BritishTelecom etc.
• Unlimited touches life expectancy. No moving parts.
• High Light Transmission- 91%.
• Durability & Resistance to Vandalism: Shock, Scratch and Vandal resistant.
• Debris resistant - Impervious to surface contaminants such as dirt, grease and moisture/ rain water / ice snow.
• Moisture: Touch panel unaffected by severe levels of moisture or water droplets on the surface.
• Chemicals: Performance unaffected by cleaning solutions.
• "Through Glass" feature - can work through shop glass windows or through a piece of sacrificial glass placed in front of the touch sensor, the software has an adjustment for sensitivity. Through Glass Feature is great for Banks, Retail Showroom Windows: The additional piece of glass -thermally toughened, minimum 3mm upto 20mm thick - can also act as an anti-vandal protective layer, so that in the event of breakage, only it needs to be replaced and not the entire touchscreen.
• The 3mm glass on the sensor is anti-glare and thermally toughened which passes the 25mm steel ball bearing drop test.
• Sealability: NEMA 12, NEMA 4 compliant.
• High Touch Resolution: 4096X4096.
• The Zytouch takes the first touch only and does not average like "other Capacitive", which can be dangerous as multiple simultaneous touches may trigger the wrong button actions.
• Does not use a surface coating like "other Capacitive", instead uses a Micro-fine wire of 10 Microns set in a special pattern, and there is no yellowish tint like with "other Capacitive".
• Does not suffer from drift like "other Capacitive" and this makes the ZyTouch very robust. No re-calibration required as it uses fixed wires to ensure zero drift over time with absolutely no need for maintenance.
• The controller is built (embedded) directly into the glass, so no extra wiring and the power is sourced through the RS232/USB port itself.
• In India , priced much lower than "other Capacitive" touchscreens.
• Wide range of Sizes available: 7" upto 22".

• Flat CRT: 17"
• Open frame LCD: 8.4, 10.4", 12.1", 15", 17", 19", 21".
• Rear/Panel Mount Metal Cased LCD monitors (IP6x, Nema 4/12 supported): 15", 17", 19", 21".

1. Are not suited to external applications, as the surface of the screen is prone to damage by scratching, which has a direct impact on performance (cursor accuracy and calibration).
2. Maintenance of normal capacitive touchscreens can be a problem as they require frequent re-calibration due to changes in temp., humidity or a power grounding problem.
3. They only work with a conductive, grounded pointing device (an uncovered finger) and are therefore unsuited to many applications where gloved fingers would be used.
4. Need to be used with proper grounded power source which is not always available in our country.
5. Low touch resolution of 1024X1024.
6. Not recommended in locations where metal enclosures and any kind of magnetic or electrical interference is present.

• Technology: Projected Capacitive.
• Connectivity: USB v1.1, USB 2.0 compatible.
• Power: <100mA from 5V USB.

• Positional Accuracy <1.5% of reported position in recommended viewing area.
• Calibration Drift Fixed embedded technology, non-contact with active sensor, zero moving parts.
• Abrasion Resistance: Glass, unaffected by surface scratching.
• Chemical Resistance: Glass, unaffected by cleaning solutions.

• Stylus Type: Finger, glove operable.
• Sensor Thickness: 3mm/7.8mm.

• Light Transmission ~ 91%.
• Surface Finishes: Standard 140 gloss anti-glare etch.
• Other finishes available upon request.

• EMC: CE, FCC-B (when fully integrated into final product)
• Safety: Laminated glass assembly complies with EN60950, UL60950, UL544.
• Vibration/Shock: In accordance with UL291 when installed in a suitable correct bezel.
• NEMA: Sealable to NEMA 12, NEMA 4.
• Operating: (-35°C to +65°C).
• Storage: (-40°C to +70°C).
• Humidity: 0 to 90% RH @ 40ºC, unaffected by condensation.
• Water: Resistant to water droplets on the surface
• Weather: Resistant to snow, ice, rain, sleet, hail, wind, etc.

Capacitve Touch Screens & Integrated Touch Monitors are used for Public Access Kiosk, ATM applications etc.
With Superior specs. such as: surface scratch hardness of 9H, durability over 300 million touches life, high light transmission rate of 93%, narrow border for easy integration, compact size touch controller board designed to fit inside all LCD displays.

Widest range of Driver support - Windows Vista, 95, 98, ME, 2000, NT4, XP, CE, CE.net, (CPU: X86, ARM, V4/V4i, SH 3/4), Linux (RedHat 9.0, Mandrake 9.2, SuSE 9.0, Yellow Dog 3.x and Fedora Core 2), DOS, iMac (OS9/X), API supported.
Our Capacitive sensors are pin to pin compatible for drop in replacement with other brands and come with a 5 years warranty.